用nozzle造句子，“nozzle”造句

And the use of nozzle with electrodes have higher service life.

Mould name: P - 201 packing paper tube（paper tube body，top cap，bottom cap and the extrusion nozzle）.

Dangling above her is the Damoclean sword included in the bar's name: a silver shower nozzle, positioned to spray flesh-revealing water on a dancer below.

Production costs born by Party B: Party B shall bear the extrusion nozzle mould cost 3000 Yuan，and the cost of plastics screw thread of 4000 Yuan.

Using a trim stick or another suitable wide flat-bladed tool, pry gently at the lower edge of the rear washer nozzle to release the snap clips that secure it to the liftgate outer panel.

The steam is cooled by the cold engine nozzle, condensing and eventually freezing at the nozzle exit to form icicles.

All these results have provided physical vision for engineering design, optimization and concept verification of HYTEN nozzle.

Experiments test the influences of pressure, height, nozzle aperture and frog momentum on the fire control effect of fine water mist.

The J-10B has four black antenna arrays attached externally to the fuselage, a larger one on either side of the cockpit and a smaller one on either side of the rear fuselage near the engine nozzle.

A suction nozzle of the vacuum cleaner is disclosed.

Get a heat gun, the one used for stripping paint, Angle its nozzle toward suspected colonies, and blast away.

The motor case is a steel cylinder closed tight at one end. The other end is the poen throat and nozzle.

Attach a hose and nozzle to the outlet of the device (Fig. 1).

It USES a fast actuated nozzle to follow the exhaust pulse, reducing the turbine inlet area periodically to increase exhaust-gas pressure.

The extraction nozzle can be placed closely to objects for maximum fume absorption.

E: Extrusion nozzle (As per sample).

Fixtures exposed to hood interior( i. e. tap nozzle) shall be made of brass with chemically resistant black vinyl coating.

In addition, plasma jet from the form into consideration, the jet from the gun in diameter is expands outward, nozzle increase in altitude inevitably lead to increased width incision.