用Teflon造句子，“Teflon”造句

Development and Application of Graphite-Teflon Composite Coating Electrode

Preparation and clinical application of Teflon-wire piston and stapes height measurer

Investigation on the Effects of the Teflon Coating Surface Characteristics on CaCO_3 Fouling

Wrap Teflon tape around the treads of the tube adapter, threaded valve ends, and all of the close nipples.

We fabricate desired structured surfaces by holographic lithography, plasma etching and Teflon coating. The performance is evaluated by measuring the reflectance spectrum and contact angle.

"Teflon is a tough, waxy, nonflammable organic compound with a slippery surface, attacked by very few chemicals and stable over a wide temperature range."

Unique design double A saddle seat sliding track, with abrasion-proof Teflon lining, low friction coefficient, using heat-treatment grinding grade guide screw, handy to operate and abrasion-proof, ensuring its accuracy and durability.

Teflon hose assembly is consisted by joint assembly, press wrap and Teflon hose.

Features include easy-to-remove Teflon covered rolls.

It is of externally-mounted type, single seal multi-spring and Teflon bellows transmission.

Teflon Piston-ring integrated with piston, not only reduce the friction and noise, but also avoid inner-leakage.

This machine adoptable to VSF, IV, KV Teflon, coaxial cable&ETC. Full Automatic cutting, stripping, half- stripping, this machine also adoptable for diversified sizes wires.

Teflon (/non-stick)pan

The Teflon Prime Minister has survived another crisis.

With Teflon, and a tiny stainless steel needle of a number 7 injector and an acupuncture needle,Teflon-piston and a measurer of the stapes height were prepared respectively of stapedotomy for treatment of otosclerosis.

之後Teflon這類的排水塗層，儘快把水匯到水庫，防止蒸發。

I want a Teflon extruder for making Teflon wire.

Wuyi caihong coatings co., Itd is engaged in professional Nonstick silicone coating Teflon and professional firms.

To ensure low leakage current and low dielectric absorption, the feed back capacitor should be made of a suitable dielectric material such as poly styrene, polypropylene, or Teflon.

Packing: Teflon or graphite packing protected from low temperatures by a column of insulating gas.

The difference is that to make water to roll-off a Teflon coated material, you need to tilt the surface to nearly a 70-degree Angle before the water begins to slide off.

As expected, the microwave beam underwent positive refraction from the Teflon prism but was negatively refracted by the metamaterial prism.

Teflon: Trademark for a polymer of tetrafluoroethylene fluorocarbon (polytetrafluoroethylene [PTFE]).

The support insulators should be made of materials with very high resistance, such as Teflon. or ceramic.