用deform造句子，“deform”造句

Shoes that are too tight deform the feet.

"In severe cases, adhesions immobilize and deform the joints, and adjacent skin, Bones, and muscles atrophy."

Under a pressure slightly less than one-way atmospheric pressure, ice crystals deform to some extent.

Mechanical link is adopted to pull blade vertically. Operation is conveniently and quickly, and die cutting plate will not deform.

Detonation may deform the steel frame of the structure, collapse the roof and sink the wall, break the wall panels, break the window glass, etc.

Rolls are the most important components in a rolling mill, which cause the rolled metal to deform plastically. They are two kinds of rolls: plain rolls and grooved rolls.

Ac cording to MPEG-4,we affirm feature points on the general model,then edit f eature points on two perpendicular images,and obtain key feature points of hum an face,then deform the general model and go along texture mapping,at last get a realistic individual model.

How do engineering materials deform when bearing mechanical loads?

Stresses applied to plastically deform the metal are usually compressive.

Unlike steel or other materials, glass does not deform or otherwise give advance warning of failure.

Weld whose heat resource is the laser, also owns the advantage such as low heat input and small heat deform.

Shotcrete rockbolt mesh support can improve the structure strength and anti-deform rigid of rock soil, and can reinforce the whole stability of side slope.

deform a structure, limb, spine

Deforming resistance is capability of material resisting deform.

Depending on the lens' focal length, the image will deform and affect how the image looks in photos.

Instantly sealing for the paper board& PP, PVC blister and the paper board not to deform, Instant heating, fully envelop perfectly for blister.

Severe variations deform the discharge curves.

When two continental plates collide, any one of them will deform and compress.

the state in which a substance has no tendency to flow under moderate stress; resists forces (such as compression) that tend to deform it; and retains an definite size and shape.

Simulation of forging deformation for 2A12 aluminum alloy with Deform 3D

For such materials with great hardness and toughness as stainless steel, high vanaduim-high speed steel, Particularly for the work piece liable to deform or to be burnt, and for dry grinding.

It has many advantages, such as high working speed, seal impression is clear and no diffusing, seal surface will not shrink or deform.

The shale beds in between generally deform plastically.

The thin glass sheet will deform after compression, so the fringes will move and change along with it.