用dew point造句子，“dew point”造句

The temperature at which the water vapor in a given sample of air becomes saturated is called the dew point.

The condensation dew point method is a high-precision detection method of water activity in foods, and temperature control is one of the key technologies of the method.

There are various test technologies of water content and water dew point in natural gas with different types of measuring instruments. However, accurate measurement is still a global issue at present.

The retrograde condensation impact tends to be unavoidable because the phenomenon that bottomhole producing pressure is lower than dew point pressure is easy to be found in productivity well test.

The surface temperature is less than3℃ above the dew point.

The dew point is the highest temperature to which the air cools to saturation moisture content.

Under normal operation conditions, after treatment by this machine, the air dew point can drop below-40℃. And we accept orders of micro-heat models below-70℃.

Like all clouds, it forms when the air reaches its dew point, which is the temperature to which an air mass must be cooled for the water vapor in it to condense into liquid droplets.

The effects of porous medium on dew points of a condensate system are mainly represented by differential adsorption of hydrocarbon and capillary agglomeration of gas.

A dew point sensor measures air humidity and prevents the Windows from misting.

Wake up every day and tell yourself: reasons a little less, was big, sweet little mouth, temper a bit smaller, quick action, high efficiency point, smile dew point, the living brain a little.

The corrosion mechanisms of low temperature dew point corrosion and improvements of atmospheric air pre-heater to resist low-temperature dew point corrosion were introduced.

Two particular corrosion types, i. e. dew point corrosion of sulfuric acid and polythionic acid stress corrosion cracking were also introduced from the aspects of corrosion m…

The outside dew point is so low that mildew is seldom a problem.

Aimed at the fact that the wall temperature of heat exchanger is lower than the dew point of flue gas, the thermal energy utilization system for flue gas of positive draft gas boiler is proposed.

Presents research status of two-stage evaporative cooling and dew point evaporative cooling air conditioning technologies, and two new application examples of this technology.

While below the dew point pressure, the gas-liquid mixed adsorption model is adopted if the retrograde condensate oil saturation higher than the critical flow saturation of condensate oil;