用spray gun造句子，“spray gun”造句
Mold spray life, with some of the formulas mentioned above, should be at least several hours with some touched up with the spray gun.
Sand or grind metal surfaces to prepare for coating, and paint metal surfaces using electrostatic method, spray gun or other painting equipment.
Triboelectric spray guns, coating booths, polymerization Chambers, recuperative installations, vibrating screens, and transport systems.
Intermittant squeezing and releasing of a spray gun trigger. Can cause surging in the powder equipment.
Brushing: stir before construction can be diluted with water. With roller, brush, spray gun construction 1 to 2 times.
Shake well before using, use a brush, roller, spray gun and other tools applied to the surface, can be repeated 2 ~ 3 times after the dry coating to achieve the best results.
Control the spray gun bolt after finishing painting, put the special watering pot on the ground.
The end-effector can be a welding head, a spray gun, a machining tool, or a gripper containing on-off jaws, depending upon the specific application of the robot.
Small spray gun paint quantity less than 100g per minute, medium spray gun every minute of paint in the amount of 180g or so, a large amount of spray paint every minute in 200g.
Reduce pressure. Use a larger nozzle. Hold spray gun closer to the surface. Spray at right angles to the surface.
On the construction of coating of high quality, the best selection of domestic or imported flat mouth suction type spray gun.
using plasma spray gun for deposition of metal [noisy occupation]
