用bolts造句子，“bolts”造句

strong heavy devices called bolts held the ship's bottom together. These bolts were made of copper.

These bolts and nuts hold the wheels on.

You'll have to drill for each of the bolts.

Heat resistant tools ,burners ,household appliances ,Kitchenware, sink covers,building exteriors, bolts ,nuts ,CD bars,meshes.

Position the shims and striker on the (GOP) and install the bolts.

Ordinary bolt connecting bolts as a permanent use, when the design requirements or questions about its quality should be carried out when the smallest lag bolts kind complex load testing and the results were consistent with national standard《mechanical fasteners, bolts, screws and stud》 (GB3098).

Then it discusses the selection of support parameters of rope bolts and makes some suggestion for Its construction.

You can either install an expensive system of treehouse cables and bolts or rig your own free-floating beam.

Internal bolts subject to vibration, fluctuating load, impact load or dynamic load shall be protected against loosening. Double nuts, unti-loose washers, tack welding, etc. shall be used.

Among them high bars, a weight of institutions to suspension set to pull to increase the safety of spring, kick institutions and lie push frame agencies are bolts of hang dumbbell or stem of the bell.

"Balance weights, if required, shall be secured to the rotor resistance ring or rotor fins. Machine screws or nuts and bolts used to attach balance weights are specifically prohibited."

You mean to play with his bolts?

Screw in hexagon-head bolts alternately.

Our products are: "Ji Da "brand hexagon bolt, 10.9 steel bolts, anchor bolts, weld screws, drilling screws, rivet, bolt.

High Strength bolts: all kinds of grade 10.9 and 12.9 high strength hex and hex socket screws, bolts, sleeves, pipe plugs, shoulder screws, stainless steel hex socket bolts, set screws.

All that is needed is to bolt the unit to its support using four bolts.

For ease of installation, insert all flange bolts through the valve flange and then through the sleeve flange, but do not let the bolts extend beyond the surface of the flange rubber (See Figure 4).

Weld switchover pieces separately on embedment and I-steel, and then connect the mullion with bolts and switchover pieces.

Adopting cold-drawing hight coils or bars of stocks and heating automatically it fits for light producing six angle bolts, rivets and other articles with heads.

He had no ropes, bolts or pitons, and preferably no knowledge of the ascent except what he had gleaned from the ground, telling himself "Dude, there's some holds here, man."

The door bolts on the inside.

Hexagon head bolts-Full thread-Product grade C

We mainly produce various types of bolts, hex nuts, thread rods, anchor bolts, and supporting washers in DIN, BS, ANSI and JIS with 4,000 tons of monthly productivity.

According to the results of the inspection of track plate, fish plate, bolts etc. must be adjusted.

EMform423 is a heavy duty lubricant for cold extrusion of nuts, bolts, screws, bearing parts, gears and many other steel parts.

No corrosion allowance is required for such parts not in contact with the inside fluid as the outside surface of shell, skirt, support lugs and so on, except for anchor bolts.

Square head bolts--Product grade C

Terry Allen burning off bolts on drawbar center casting.

The anchor bolts and nuts must be processed and used as a whole set. The embedded anchor bolts for equipment foundation shall be installed and fixed with positioning forms.

If you're able to remove the bolts by unscrewing the nut on the inside of the window then do this first.

He heard the chain and bolts withdrawn.

The machine consists of cylinder, piston, rotary, shaft, gears, bearings, bolts, screws and stainless steel crusts.

The elbow shall be bolted to the floor of the wet-well and be so designed as to receive the pump connecting flange without the need for any bolts, nuts or clamps.

Exposed Fasteners: Unless otherwise indicated, provide countersunk flat Phillips heads for exposed screws and bolts.

You don't think other people's understandings as the nuts and bolts in that you are yourself of great account and proud as a king inside . 真正不羈的靈魂不會真的去計較什麼，因為他們的內心有着國王般的驕傲。

The bolts are made from excellent quality alloy steel, the nuts and washers are made from carbon steel, cheese head studs for stud welding are made from ML15AL.

Founded in 2008, Haiyan Changde Hardware Manufacturing Co. , Ltd. specializes in manufacturing carriage bolts, hex bolts and guard bolts with standards of DIN, ANSI and GB and non-standard bolts.

While fixing all embedded parts and embedded bolts, high precise level meter is required for measurement of elevation.